sparkcore

Spark Core

I’ve been spending some time playing with the Spark Core. This device is an open source ARM-based microcontroller with WiFi on-board. It belongs to the Spark OS ecosystem, which aims to be an easy, secure, and scalable solution for connecting devices to graphical interfaces, web services, and other devices. One interesting feature is how you interact with the Spark Core: it has support for mobile devices (iOS or Android), a Web Integrated Development Environment (IDE), and a command line.

The Spark Core devices (also known as “cores”) function in tandem  with the Spark Cloud service (also called the “cloud”) on the internet. The cloud is responsible for managing your cores, developing the core code, and loading applications on your core. Spark Cloud accounts are free and can be created on the Spark build page. Many cores can communicate with each other through a publish/subscribe messaging system made available through the cloud.

IMG_1340

The Spark Core comes in a great package. The box promises that “when the internet spills over into the real world, exciting things happen.” Conveniently, the core comes with a breadboard and a micro USB cable right in the box. This all-inclusiveness makes it ideal for beginners. And it even comes with a sticker!

The easiest way to get your core up and running is to use your mobile device. Simply download the Spark mobile application and connect your mobile device to the same network that the core will use. Turn on your core and make sure it is in listening mode.  Next, use your mobile application to log into your cloud account. You will then be prompted for the network credentials to be used by the core. This will begin a search and registration process where the mobile device finds the core, connects it to the network, and registers the core to your cloud account. The RGB LED on the core shows the status of the internet connection. Once your core is online and registered to your account, you are ready to start playing it!

IMG_1341
IMG_1344

First, I wanted to try interacting with my core from my mobile device. This can be done using a part of the Spark mobile application called Tinker.

IMG_1346

Tinker is more of a prototyping app than it is a dedicated programming environment. It allows you to simulate analog and digital inputs and outputs on the core. Tinker can be integrated with code written for the core so that an application running on your core can interface with the Tinker application on your mobile device.  My experience with Tinker was only so-so as it crashed a number of times on my iPhone 6.

Next, I wanted to try programming my core from the web through the Spark Cloud build website. To do this, I simply logged on to my cloud account which automatically loaded the web IDE. I was curious about how easy it was to import and implement external libraries. To get a feel for this, I tried to connect my core to an LED strip and control it via the Tinker app.

Screen Shot 2014-10-22 at 8.02.45 PM

The web IDE is very clean and easy to use. There are mouse-over tips to help you navigate the environment. The controls (located on the left panel of the IDE) are as follows from top to bottom: flash, verify, save, code, libraries, docs, cores and settings. Double clicking any one of these icons expands and collapses the grey information pane.

The Spark Core language is Arduino compatible as it supports the functions defined in the Arduino language specification. It also includes some extra features that enable you to do things like interact with the network settings and subscribe to specific events from the cloud. Unfortunately, many of the Arduino libraries included in the Arduino IDE have not been implemented for the Spark platform. This may create some problems if you are trying to port your old Arduino code to a core.

Screen Shot 2014-11-05 at 8.58.16 PM

Including the Adafruit NeoPixel library was very easy. I simply searched the available libraries and clicked the import button for the library I wanted to use. All of the necessary includes were automatically inserted into my code. The library display pane also allowed me to browse and/or import the sample code from the library I selected.

Once my code was complete and verified, I simply clicked the flash button and waited for the cloud to update my core. Success!

IMG_1362

Finally, I tried connecting to my core with the Spark Command Line Interface (also called spark-cli). This package is an open source command line tool which uses node.js to program your core. It  works over both WiFi and USB (which is handy when the network is unavailable). The spark-cli tool is not packaged well and was a little tricky to install. After installing node.js, I kept getting compile failures. After some digging I finally got it to work by opening XCode and accepting some license agreements.

The spark-cli tool allows you to interact with your core in a more advanced way. The command line allows you log into the core and read any serial output being generated by the application. It also enables you to manage the application running on a core, such as compiling and uploading new applications or reverting the core to its factory state. Much like Tinker, the spark-cli allows you to simulate both analog and digital input or output. It also enables you to publish and subscribe to events in the cloud so that you can communicate with other cores.

On the hardware front, it is important to note that the internal WiFi chip uses an older version of the 802.11 standard. As the Spark Core uses 802.11b/g, it won’t connect with newer 802.11n networks. I ran into this issue when moving my core between networks. In this case, I had to connect to the core via USB and use a serial connection to enter my network credentials manually. I later discovered that this could also be done via the spark-cli tool.

spark_core_serial

Storing all of your code in the Spark Cloud is both a blessing and a curse. Currently, there is no easy way to version your code or to determine what version of a library is available in the web IDE. I fumbled a bit programming the LED strip because I had to dig around to see which version of the NeoPixel library was available. Additionally, Having the code in a private remote location also makes it harder to share code with other people. Because the core is programmed over the internet, it takes longer to program. This can be too time consuming if you are doing rapid iterative development.  On the positive side, remote code storage and programming means that you can easily modify and upload your application to any core from any web browser. This means no more frantic searching for the correct cable, code version, library version and so on.

To give you an idea how the Spark Core stacks up to other ARM-based microcontrollers, I compared it to two other devices in my project box:

Feature
Spark Core 1.0Arduino DueTeensy 3.1
Processor72 MHz ARM Cortex M384 MHz ARM Cortex M372 MHz ARM Cortex M4
Memory (Flash)
128KB512 KB256 KB
Voltage
3.3v3.3v3.3v
Regulated output voltage
3.3v3.3v and 5v3.3v
Cost
$39$50$20
Size
1.47" x 0.8"4" x 2.1"1.4" x 0.7"
Digital pins
185434
Analog pins
81221
5v tolerant input pins
7021
SPIyesyesyes
UART (Tx/Rx)
143
I2C (SDA/SLC)
122
JTAG
yesyesno
WiFi
yes (802.11 b/g)nono
Programming environmentWeb and Mobile IDE (WiFi),
Command line (USB or WiFi)
Arduino IDE (USB)Arduino IDE + Teensyduino (USB)

The online nature of this device makes it a good choice for people new to Arduino programming. Since the core is internet based, setup is easier than with an Arduino as there are no FTDI drivers to install or serial issues to debug. The RGB LED used for network status is a clever way to assist beginners with debugging connectivity issues. The Spark Core shields are a great starting point for many projects. The Shield Shield makes any Arduino shield compatible with the Spark Core layout, which allows you to take advantage of the large number of Arduino shields already out there. The Spark documentation is very clear and it has a helpful community of users in case you have any questions.

Veteran Arduino programmers can enjoy the advanced features of the Spark OS ecosystem. The distributed nature of the Spark OS makes it simple to connect devices together. The publish/subscribe messaging mechanism allows devices to interact with each other in real time. The RESTful API built into the Spark Cloud makes it easy for any web service to interact with any of your devices on the cloud. On the administrative front, the command line tool gives more power to the user. I was especially pleased that I could use the command line to remotely read the serial output while the core was running.

All in all, I think this is a great board for both beginners and advanced Arduino users. Just like any new device, the Spark Core has some growing pains to work through. Despite that, it offers some great features that make it easy to look past some of the shortcomings.  The on-board WiFi is a real game changer in the hobbyist microcontroller market. I look forward to more internet-enabled projects!